A shrink-fit sample is manufactured with a Ti-8Al-1Mo-1V alloy to introduce a multi-axial residual stress field in the disk of the sample. A set of strain and orientation pole figures are measured at various locations across the disk using synchrotron high energy X-ray diffraction. This data set contains the strain pole figures and local orientation distribution functions for 105 diffraction volumes interrogated. Data reduction from the raw image files were performed using a suit of Matlab analysis code developed by the Deformation Processes Laboratory at Cornell University. The orientation distribution functions were computed from pole figure data using OdfPf package developed by the Deformation Processes Laboratory at Cornell University.